Product InformationBig Kid Bed Bumper Info
 Safety Warning: This Bed Bumper for Big Kids is not intended for babies. It is also not intended for use in conjunction with a crib. This bed bumper, as with any child’s bedding, should only be used when a child is no longer at risk for SIDS due to suffocation. The child should also already be accustomed to other types of bedding, such as blankets, sheets and pillows. Our materials are not flame retardant, so keep away from any open flame. Prior to any child sleeping with a Bed Bumper for Big Kids, the bumper should be checked for proper attachment and to be sure the adhesive hook and loop fastener is also still secured to the wall. Disclaimer: My Doudou™ Bed Bumpers for Big Kids are not guaranteed to prevent injury. When used correctly, they are designed to reduce the risk of injury caused during normal sleep-time tossing and turning. They are also not guaranteed to keep your child warm. They acts as a buffer between your child and a cold wall, reducing the effects of a chilly wall. We also cannot guarantee that this Bed Bumper for Big Kids will indeed adhere to your wall. Mounting Instructions: My Doudou™ Bed Bumper for Big Kids should be used on non-porous, clean and dry painted walls. Position the bed bumper on the wall, alongside the bed, where you would like it to remain. The bottom of the bed bumper should be partially tucked between the bed and the wall. Remove the adhesive backing from the hook & loop strip that is attached to the bed bumper. Press the adhesive strips firmly onto the wall so that the bed bumper is horizontally level with the bed. Wait 1 hour for adhesive to set. Adhesive reaches maximum strength in 24 hours.
Note: Moving the fasteners from original location will weaken sticking power and may mark painted surfaces. Moving or Removing Adhesive Velcro Strips from Painted Wall The longer that your hook & loop strips are on the wall, the stronger the
bond will be. To completely ensure proper removal of adhesive Velcro
strips without damage to painted walls, please follow these steps… Step 1: Gently position the blade of a putty knife at the edge of the tape and,
using light force, attempt to slide the knife under the tape without
pulling up any paint or wallboard. Step 2: If you experience difficulty getting the knife underneath the
tape, stop and get a blow-dryer. Step 3: Heat the tape with the blow-dryer, alternating between low and high
heat, and stopping occasionally to work at the tape with the knife. The
heat should make the tape soft and easy to remove. Step 4: Clean the sticky residue that remains with an adhesive remover such as
Goof Off or Un-Du, using a dry rag. A few careful strokes with the
adhesive remover and you're finished! Care Instructions: Alternative Uses: These bed bumpers can also be used for special needs children and adults, the elderly or even in college dorm-rooms! Contact us if you would like an alternate fabric than what is available on our site. We can custom make bumpers in adult patterns. SmartSeat Chair Cover Product Questions Will the SmartSeat cover fit my chair? The SmartSeat chair cover is designed to snuggly fit most dining room and kitchen chairs, even those with side arms. We have found that it looks great on chairs ranging from 18″ to 25″ wide (measured at the widest part of the chair seat). The actual dimensions of the cover are 23″ deep and 24″ wide at the front, tapering to 19″ at the back. How can the SmartSeat cover protect my furniture? The SmartSeat is completely waterproof. Instead of spills soaking into the fabric of your dining room chairs they land on the cover and can then be quickly and easily cleaned. The cover is machine washable and stain resistant. How do you clean and care for a SmartSeat chair cover? SmartSeat is easy to clean: simply hand or machine wash on gentle cycle in warm water and line dry. For stubborn stains, try a diluted bleach solution (1 part bleach, 10 parts water). What is the SmartSeat chair cover made out of? SmartSeat is made from safe, toxin-free polyurethane coated polyester knit that is used to make soft medical products found in hospitals and doctors’ offices. The webbing straps are lightweight polypropylene. How does the SmartSeat fasten to a chair? SmartSeat chair covers easily attaches to your dining room or kitchen chairs using adjustable straps that securely hold the cover in place. |
Reproduction in whole or in any form or medium without expressed written permission of RAPN, Inc. dba Kidz Comfort is strictly prohibited and punishable by law.